|
Model |
RG-AP840-I |
|
Hardware specifications |
|
Radio |
Dual-radio dual-band（2.4G+5G）：2.4G 2×2 MIMO + 5G 4×4 MIMO |
|
Protocol |
Supports standard 802.11ax, dual-radio dual-band, concurrent 802.11ax and 802.11a/b/g/n/ac |
|
Operating Bands |
802.11b/g/n: 2.4G ~ 2.483GHz
802.11a/n/ac/ax: 5.150 ~ 5.350GHz, 5.47 ~ 5.725GHz, 5.725 ~ 5.850GHz (vary depending on different countries) |
|
Spatial Streams |
Up to 6: 2×2:2 in 2.4GHz, 4×4:4 in 5GHz |
|
Max Throughput |
Maximum throughput of 2.4G: 400Mbps
Maximum throughput of 5G: 4.8Gbps
Maximum throughput per AP: 5.2Gbps |
|
Modulation |
OFDM: BPSK@6/9Mbps, QPSK@12/18Mbps, 16-QAM@24Mbps, 64-QAM@48/54Mbps
DSSS: DBPSK@1Mbps,D QPSK@2Mbps, and CCK@5.5/11Mbps
MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM, 256QAM and 1024QAM
OFDMA (up to 1024-QAM) |
|
Antenna |
Integrated antenna design |
|
Antenna Gain |
2.4G: 3dBi
5G: 3dBi |
|
Service Ports |
3 10/100/1000M Ethernet ports (The LAN1 Port supports PoE in, LAN3 Port supports LAN & IoT module expansion with PoE out) |
|
Management Port |
1 console port |
|
USB |
1 USB 2.0 port |
|
IoT Capability |
BLE |
|
Reset Button |
Support |
|
Anti-theft Lock |
Support |
|
LED Indicator |
1 LED indicator (Supports red, green, blue, orange and flashing mode, which indicates device access. The indicator can be switched off to silent mode.) |
|
Transmit Power |
≤100mw (20dBm) (vary depending on different countries) |
|
Adjustable Power |
1dBm |
|
Power Supply |
Local power supply (DC 48V/1A) (Power adapters are sold separately)
PoE+ (802.3at)
PoE (802.3af) – Not recommended: 5G radio is degraded to 2x2 MIMO, and the PoE out of the LAN3/ IoT port is disabled |
|
Power Consumption |
<25.4W |
|
Physical Specifications |
|
Temperature |
Operating Temperature: -10°C to 50°C |
|
Storage Temperature: -40°C to 70°C |
|
Humidity |
Operating Humidity: 5% to 95% (non-condensing) |
|
Storage Humidity: 5% to 95% (non-condensing) |
|
Installation Mode |
Ceiling/wall-mountable |
|
Dimensions |
220 × 220 x 48.85 mm (W x D x H) |
|
Weight |
1.30kg |
|
IP Rating |
IP41 |
|
Software Specifications |
|
WLAN |
Maximum clients per AP |
1024 |
|
BSSID capacity |
Up to 32 |
|
SSID hiding |
Support |
|
5G Priority (Band Steering) |
Support |
|
Configuring the authentication mode, encryption mechanism and VLAN attributes for each SSID |
Support |
|
Remote Intelligent Perception Technology (RIPT) |
Support |
|
Intelligent device recognition technology |
Support |
|
Intelligent load balancing based on the number of users or traffic |
Support |
|
STA control |
SSID/radio-based |
|
Bandwidth control |
STA/SSID/AP-based bandwidth control |
|
Data encryption |
WPA (TKIP), WPA-PSK, WPA2 (AES), WPA3, WEP (64/128 bits) |
|
PSK and web authentication |
Support |
|
PPSK authentication (For Employee) |
Support (require wireless controller) |
|
802.1x authentication |
Support |
|
PEAP authentication |
Support |
|
Data frame filtering |
Whitelist, static/dynamic blacklist |
|
User isolation |
Support |
|
Rogue AP detection and countermeasure |
Support |
|
Dynamic ACL assignment |
Support |
|
RADIUS |
Support |
|
CPU Protection Policy (CPP) |
Support |
|
Network Foundation Protection Policy (NFPP) |
Support |
|
IP |
IPv4 and IPv6 address |
Support |
|
Multicast routing |
Multicast to unicast conversion |
|
DHCP service |
DHCP Snooping, Option 82, Server, Client |
|
Management and Maintenance |
Supported wireless LAN controllers |
Ruijie WS Series Wireless Controller
Ruijie MACC-Base Software Controller
Ruijie Cloud (Public Cloud) |
|
Management protocol |
Telnet, SSH, TFTP, Web |
|
Wireless Intelligent AI Optimization Service (WIS) |
Support |
|
SNMP |
SNMPV1,V2c,V3 |
|
Syslog / Debug |
Support |
|
FAT/FIT/MACC mode switching |
Factory default firmware supports FAT (standalone) or FIT mode (WS controller) or MACC mode (Ruijie MACC-Base or Ruijie Cloud) management |